Views: 50 Author: Site Editor Publish Time: 2022-03-15 Origin: Site
Since the novel coronavirus pneumonia outbreak, the mask resources in the whole country and the whole world are very scarce. Mask has become a hot and short supply. To ensure a small mask block the terrible virus, mask machine is highly responsible. Mask machine should be disinfected in the whole process. And the accuracy and quality of the mask machine are strictly required.
l How to operate a mask machine safely?
l How does mask machine work?
l How to choose lubricants for mask machine?
Turn on the power button of mask machine and check whether the built-in light of the power switch is on. Adjust the air pressure valve under the worktable to adjust the pressure according to the actual situation. The working air pressure is generally adjusted within the range of 0.2 to 0.6 MPa. Make sure the mask machine is stopped. After that, press the power switch of the ultrasonic generator. At the same time, turn on the "Sound Wave Test" switch. If you find the amplitude indicator rises abruptly and also exceeds 100, then the frequency is too far from the resonance point. Therefore, the "Sound Wave Adjustment" knob must be adjusted quickly. Pay close attention to the amplitude indicator, press the "Sound Wave Inspection" check switch, and turn the "Sound Wave Adjustment" knob. In doing so, you can turn the pointer of the amplitude indicator to the lowest point. During adjusting, if the amplitude indicator does not fall or in contrast, it rises, turn the "sound wave adjustment" knob to the opposite direction. After that, tighten the butterfly nut and close the protective cover. The inspection of the cooling fan is to check whether the cooling fan is working normally to ensure that the ultrasonic transducer can work for a long time when it is working.
Three rolls of non-woven fabrics are automatically stacked and folded by the mask machine body, and then cut into the shape of the mask. Then, the ear belt is automatically welded at the mask machine for ear belt or mask binding machine. After that, the finished product is packaged after disinfection and other procedures. The whole process is fully automated, producing 1-2 masks per second on average. The degree of automation of mask machine is very high, and the whole process is very easy.
To be able to smoothly flip the mask cloth, prevent it from entangling and improve work efficiency, the use of lubricating grease for bearings is important. And direct metal-to-metal contact that occurs in rolling elements, raceways and cages, and bearings will soon be damaged by dry grinding and heating. Therefore, the selection of lubricating oil grease suitable for bearings on a regular mask machine is of great significance. High-quality lubricants for mask machine should have the following features: special additive blending and excellent wearing resistance. It should also be suitable for multi-friction environments. Excellent lubricants should have uniform film distribution, and cause little friction. With a wide temperature range, mask machine should perform well in both high and low temperature. In addition, mask machine should also have oxidation resistance, inactive chemical properties. It should have strong adaptability to materials. Being water-resistant, it also should not corrode materials.
Learning something about the working principle of mask machine can help you know more about its operation. If you are interested in mask machine, Yikai Company can provide you with the best products.
